JakefaceCustoms
NZXT H7 Custom Vented Front Panel Works with all models! (2022)
NZXT H7 Custom Vented Front Panel Works with all models! (2022)
Couldn't load pickup availability
This is the ORIGINAL custom NZXT H7 Standard, Elite, & Flow FRONT panel! I am the first creator of these vented acrylic panels, which feature opaque hand PAINTED BORDERS that hide case frame and mounting hardware for a sleek look and easy installation. The vents in my ORIGINAL designs improve airflow, lowering temperatures ~5-10 °C (varies by system). The acrylic used is rigid, single-sourced, and comes protected with a paper-backing to ensure the best quality. All panels are made to order, by hand. Custom designs are available; please send me a message with your request!
FEATURES:
- Clear or Smoke acrylic
- Installs exactly like the stock panel (NO MAGNETS)
- No modding required
- Installs in seconds
- Multiple designs available
COLORS:
Acrylic:
- Clear (Standard clear acrylic)
- Smoke Grey (Dark Tinted transparent acrylic, similar to side panel on the black case)
- Solid Matte Black
- Solid Matte White
- Walnut (real wood)
Border:
- Black (works with both acrylic colors)
- White (works with clear acrylic)
LEAVE A NOTE IN THE TEXT BOX IN THE CART
*All panels are shipped with the paper still attached to prevent scratches during shipping.
*This listing is for a panel only, case is not included
*Does not fit H710
*Does not work with the newest H7 made in 2024
Materials: Acrylic,Resin
Collapsible content
Installation
H510 Side Panel
If your new panel isn't fitting easily or you have a newer
model, check the front left corner of the case near the
bottom. There may be a metal tab blocking installation.
Simply bend down that tab in order to have an even fit.
H510 Front Panel
Remove both side panels. On the upper part of the case,
there is a little screw on either side that must be removed
for the original panel to pop off.
If the replacement panel is not fitting easily, especially if
you have a newer model: check the front of the case near
the left side for a small plastic wedge piece. This wedge
serves no purpose and must be removed for the front
panel to fit as intended.
H1 Front Panel
Before installation, remove the six rubber pads on the
front of the case (beneath the factory panel.)
Optional Fan Filters
If you purchased fan filters, these can be installed on the
front or back of your fans using the existing screws
already holding your fan in place.
A4H2O, Meshilicious, Q58, Ncase M1 and any other panel
with pins/pegs:
CAREFULLY and GENTLY install and remove!
Install: line up the pins and they should easily pop into
place (Don't smash!)
Remove: Remove carefully, one pin at a time while
keeping the panel close to the case. Do NOT yank or rip
the panel off from an angle or one side!
TIPS
- Installs like the stock panel!
- No modding required!
SHIPPING
- All international orders include Insurance
- International customers: Tax, duties/VAT may be collected at time of delivery.